BEKOMAT VIETNAM

BEKO VIETNAM - BEKOMAT VIETNAM - ANS VIETNAM 

INTRODUCTION

 

Safe, clean, more effective – optimised compressed air technology

BEKO TECHNOLOGIES develops, manufactures and sells components and systems worldwide for an optimised compressed air quality.

BEKO TECHNOLOGIES is independent

With an extensive program BEKO TECHNOLOGIES stands for compressed air technology "at its best". For more than three decades, BEKO TECHNOLOGIES has developed, manufactured and sold high-quality, reliable and efficient components and systems for compressed air processing and condensate technology.

Now, BEKO TECHNOLOGIES offers a complete program for all tasks related to the processing of compressed air. Expert advice and a qualified service are a trademark of the independent and family-owned company.

Partnership to success

Only a complete understanding of our business leads to success. Therefore, BEKO TECHNOLOGIES always focuses on the customer and on his unique demands. Our consultants and development engineers are trained in the latest developments in order to implement futureproof solutions for our clients. Operational reliability, energy conservation, environmental friendliness and a contribution to decent working conditions constitute important focal points of the corporate philosophy.

PRODUCTS

 

Compressed air treatment		Condensate technology		Distribution
Filtration	Drying	Discharge	Processing	Pipework
CLEARPOINT®	DRYPOINT® AC / HP DRYPOINT® M DRYPOINT® RA EVERDRY®	BEKOMAT®	BEKOSPLIT® ÖWAMAT® OEKOSORB®	BEKOFLOW®

Measurement	Process technology	Service
		Maintenance	Training	Tools
Oil vapour Humidity Volume flow Leakages	BEKOBLIZZ® BEKOBLIZZ®LC BEKOKAT®	Inspection Repair and more...	e-Learning: Basics of com- pressed air	Condensate calculator Unit converter

1. CONDENSTATE DRAINAGE

 

Condensate drainage

The generation of compressed air is always connected with the formation of condensate. In most cases, this condensate contains oil, is contaminated with dirt particles and spreads out in the entire compressed-air system. A system problem which can result in damage and additional costs. 

The BEKOMAT drains condensate in the compressed-air system in an electronically level-controlled manner. More than 2,000,000 installations worldwide make it the industrial standard for reliable and cost-effective condensate drainage.

BEKOMAT^®

BEKOMAT 12,13,14,16,20

to the product

BEKOMAT^® with Service-Unit

BEKOMAT 31, 32, 33

to the product

BEKOMAT^® Special devices

BEKOMAT 3, 6, 8, 9

to the product

2. CONDENSTATE PROCESSING

Oil-water separation / activated-carbon replacement filters / emulsion splitting plants

Compressed-air condensate often consists of 99% water and 1% oil. Therefore, on-site processing of the oil-containing condensate by means of ÖWAMAT oil-water separation systems is always more favourable than the cost-intensive disposal via specialist companies.

Only the original filters guarantee the reliable and cost-effective function of the ÖWAMAT : OEKOSORBreplacement filters made by BEKO TECHNOLOGIES. They meet all the requirements of the Water Ecology Act and of other relevant provisions. 

Stable emulsions of oil-containing condensate or industrial wastewater cannot be processed by oil-water separation systems. With BEKOSPLIT, the independent, particularly cost-effective processing is possible and useful for every company. 

BEKOSPLIT^®

Emulsion processing

to the product

ÖWAMAT^®

Oil-water separation

to the product

OEKOSORB^®

Replacement filters

to the product

3. COMPRESSED AIR FILTRATION

Filtration

The energy costs of a compressed-air system are decisively influenced by the pressure drop occurring during compressed-air filtration. To maintain the required operating pressure, this pressure drop needs to be compensated by correspondingly higher compressor performance. 

The consequence: increased energy demand, premature wear of the compressor ... and therefore higher costs. The better solution: CLEARPOINT compressed-air filters by BEKO TECHNOLOGIES.

CLEARPOINT^®

Up to 34,680 m³/h at 7 bar Filter management optional

to the product

High-pressure filters

High-pressure filters up to 500 bar

to the product

CLEARPOINT^® V

Activated-carbon adsorber
Activated-carbon filter with cartridge

to the product

4. COMPRESSED AIR DRYING

Drying

In addition to filtration, compressed-air drying contributes significantly to an increase in process reliability. Humidity in compressed-air systems causes corrosion, and promotes the growth of micro-organisms. In individual cases, condensate emerges at the point of use - an ongoing danger for the operational flow, for example because of failing pneumatic controls, increased wear and tear or because of other disturbances in the production process.

With considerably enhanced process reliability, the DRYPOINT dryer technology offers decisive advantages for every field of application. The BEKO TECHNOLOGIES portfolio comprises application-optimised refrigeration, adsorption and membrane dryers for volumes up to 1,500 m³/h. This range of dryers is completed by heat-regenerated EVERDRY adsorption dryers which are designed for large volume flows up to 20,000 m³/h.
 

DRYPOINT^® AC

Adsorption dryers with a very short payback period

to the product

DRYPOINT^® AC HP

Adsorption dryers for high-pressure applications up to 500 bar

to the product

DRYPOINT^® M PLUS

Compact and efficient membrane dryers

to the product

 

DRYPOINT^® RA

The comprehensive refrigeration dryer range of products. The suitable solution for every task. With extremely low flow resistances.

to the product

 

EVERDRY^®

Customer-orientated, made-to-measure plant construction

to the product

5. MEASUREMENT TECHNOLOGY

Measurement technology

In the field of compressed air, the measurement technology provides the data base for the assessment and assurance of the compressed-air quality and for the identification of hidden cost drivers.

METPOINT^® OCV

Monitoring system for residual oil in compressed air

to the product

METPOINT^® DPM

Unit for dew point measurement

to the product

METPOINT^® FLM

Shows you what you should be looking for

to the product

 

METPOINT^® LKD

Detects every leak. Precisely and quickly.

to the product

 

Minimum pressure valves

Overrunning of compressed air treatment systems can create serious problems

to the product

6.


















6. PROCESS TECHNOLOGY

Process technology

Production processes can be optimised with the pathbreaking process technology of BEKO TECHNOLOGIES. Economic plant operation, reduced cycle times and an increase in productivity are only a few of the advantages.

The BEKOBLIZZ LC compressed-air cooler cools economically with cold compressed air (+5 °C), without using CO2 or N2.

BEKOKAT provides constantly oil-free compressed air for highly sensitive applications.

BEKOKAT^®

Constantly oil-free compressed air

to the product

BEKOBLIZZ^® LC

The compressed-air cooler

to the product

BEKOBLIZZ^®

Optimised cooling processes with cryogenic and dry compressed air